About the Product
The CX Series spans all kinds of systems, whether you're just trying to get a little more out of your factory radio or you're ready to blow the doors off with a completely aftermarket setup. Either way, the quality of your sound is at the heart of the CX Series. Sleek, simple styling and installation flexibility all round out the amplifiers' functionality.
Kicker makes your installation simple, but gives you plenty of options. Make it easy on yourself when plugging in with Kickers KISL so you can take high-level signal from the head unit's speaker outputs straight into the amp's RCA input. Also, most models are just more than two inches thick and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.
CXA300.1
The CXA300.1 puts the thunder in your bass. This Class-D 2-ohm stable single channel amp is built to handle 300 watts at 2 ohms for 1 channel, or 150 watts at 4 ohms.
Like most of the amps in the CX series, it's easy to control your bass output from the driver's seat. Pick up a Kicker CXARC wired remote bass level control, plug it in, and optimize your sound easily.
Under the hood
Kickers KISL
The CX Series has a lot of built-in technology to make sure your system just keeps going for the long haul. With litz-wound transformers to maximize power transfer while minimizing power loss, high current switching, buffered RCA outputs, these amps are built to put out lasting, quality power.
These amps also include their own crossovers and an adjustable KickEQ Bass Boost. A 3-second turn-on delay helps eliminate any additional interference that might affect your system.
But these amps also have Kicker's Failsafe Integration Technology inside. That means they can take signal from any audio source and run it straight into the amp. For you, it means no need for line-out converters, step down modules, processors or less conventional wiring to complete your system. Kicker's FIT eliminated the need for additional equipment that could introduce additional noise to your signal. It even works well with factory amplified systems from other premium brands.
General Features:
- Kicker CX Series CXA300.1
- Class-D 2-Ohm Stable Monoblock Amplifier
- RMS Power Rating:
- 4 ohms: 150 watts x 1 chan.
- 2 ohms: 300 watts x 1 chan.
- Total power output: 600 watts
- Pulse Width Modulated MOSFET power supply
- Kicker CXARC wired remote bass level control available and sold separately
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs via RCA
- Requires Kickers KISL, available and sold separately
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Input sensitivity:
- Low level: 125mV-5V
- High level: 250mV-10V
- Frequency Response: 25 - 200Hz
- Signal to Noise Ration: >95dB
- Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
- Fixed Subsonic Filter @ 25hz, 24db/octave
- 8 gauge power and ground wiring is recommended for installation.
- Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H
